Construction of the Stonehenge
July 29th 2008 03:15
Excavations at Stonehenge since the 1950s suggest the monument was constructed in three main phases. The earliest phase of Stonehenge was completed by about 2900 BC. It consisted of a circular ditch 110 m (360 ft) in diameter and 1.5 m (5 ft) deep. Archaeologists believe deer antlers were used as picks to loosen the chalk bedrock. Excavated material was used to build a circular embankment along the inside rim of the ditch. Along the interior edge of the embankment the ancient architects dug 56 pits. These pits are named Aubrey Holes, after John Aubrey, who first observed them. The pits may once have held wooden posts.
In a second phase of construction, lasting from about 2900 to 2500 BC, several new timber structures arose at Stonehenge. Timber posts were erected in the flat ground at the center of the encircling ditch. Posts were also raised at a break in the ditch to the northeast, a place that served as an entrance to the site.
Stonehenge was radically and repeatedly transformed during a third phase of building, which lasted from about 2550 to 1600 BC. About 80 pillars of various types of igneous rock, called bluestones for their color, were erected near the center of the site in two concentric circles. The bluestones came from outcroppings in the Preseli Mountains of southwestern Wales, located roughly 220 km (137 mi) from Stonehenge. Transportation of the rock pillars, which weigh as much as 4 metric tons each, was a remarkable achievement and may have involved sea, river, and overland routes.
During this third phase of building, Stonehenge underwent a complicated sequence of remodeling. The double circle of bluestones was soon dismantled. Great blocks of a different kind of stone, a sandstone called sarsen, were brought from Marlborough Downs, located 40 km (25 mi) north of Stonehenge. Thirty of these new and much larger pillars of sarsen were erected in a circle with a diameter of about 33 m (108 ft). This structure is now known as the Sarsen Circle. Each pillar stood approximately 4 m (13 ft) above the ground. Mounted atop the 30 pillars was a continuous ring of sarsen crosspieces, called lintels. The lintels were matched together with tongue and groove joints and were attached to the pillars with mortise and tenon joints. With its engineering, design, and precise stonework, the Sarsen Circle is considered one of the most impressive features of Stonehenge. Of the 30 original sarsen pillars, 17 remain standing today along with six of the lintels.
Within the Sarsen Circle, a massive horseshoe-shaped structure was erected. The horseshoe, which opens to the northeast, toward the entrance to the structure, was constructed of five pairs of gigantic upright blocks of sarsen. Each block weighs 40 metric tons or more. A stone lintel on top of each pair makes each into a great archway called a trilithon (a word derived from Greek that means “three stones”). The trilithons increase in height toward the central and largest one, which measures 7 m (24 ft) above the ground. Three of the five original trilithons, complete with their lintels, remain standing today.
Several other features at the site are also associated with the third phase of construction. These include the Altar Stone, a block of greenish sandstone that sits at the base of the central trilithon near the center of the horseshoe. Once standing, the Altar Stone now lies flat against the earth, and—like the bluestones—came from southwestern Wales. Just inside the interior of the circular embankment, four stones, called station stones, were erected. Two of the stones are still standing. The station stones were situated approximately in line with the older Aubrey Holes. Imaginary lines connecting the stones opposite each other intersected at the very center of the monument. In addition, more sarsen stones were placed near the entrance to the monument. The two that survive are called the Slaughter Stone and the Heel Stone. The Heel Stone rises just outside the encircling ditch on the Avenue, a long earthwork structure that is marked by parallel banks. The Avenue is interpreted as a ceremonial approach to Stonehenge.
In later years, the bluestones were further rearranged. Eventually, some of the bluestones were used to erect a circle of pillars between the Sarsen Circle and the trilithon horseshoe, and a horseshoe of bluestone pillars was erected inside the trilithon horseshoe.
There are more than 1,000 stone circles in the British Isles, but Stonehenge is unique among them. No other circle has massive stones trimmed into neat shapes, like giant building bricks, or lintels perched atop them. The sophisticated engineering and joinery employed at Stonehenge suggest that it was built by people who were skilled in making great structures out of timber. Archaeologists now know that Stonehenge was just one of many prehistoric structures, collectively called henges, built of earth, river gravel, timber, or stone. Like the surviving stone circles, most were circular in shape.
In a second phase of construction, lasting from about 2900 to 2500 BC, several new timber structures arose at Stonehenge. Timber posts were erected in the flat ground at the center of the encircling ditch. Posts were also raised at a break in the ditch to the northeast, a place that served as an entrance to the site.
Stonehenge was radically and repeatedly transformed during a third phase of building, which lasted from about 2550 to 1600 BC. About 80 pillars of various types of igneous rock, called bluestones for their color, were erected near the center of the site in two concentric circles. The bluestones came from outcroppings in the Preseli Mountains of southwestern Wales, located roughly 220 km (137 mi) from Stonehenge. Transportation of the rock pillars, which weigh as much as 4 metric tons each, was a remarkable achievement and may have involved sea, river, and overland routes.
During this third phase of building, Stonehenge underwent a complicated sequence of remodeling. The double circle of bluestones was soon dismantled. Great blocks of a different kind of stone, a sandstone called sarsen, were brought from Marlborough Downs, located 40 km (25 mi) north of Stonehenge. Thirty of these new and much larger pillars of sarsen were erected in a circle with a diameter of about 33 m (108 ft). This structure is now known as the Sarsen Circle. Each pillar stood approximately 4 m (13 ft) above the ground. Mounted atop the 30 pillars was a continuous ring of sarsen crosspieces, called lintels. The lintels were matched together with tongue and groove joints and were attached to the pillars with mortise and tenon joints. With its engineering, design, and precise stonework, the Sarsen Circle is considered one of the most impressive features of Stonehenge. Of the 30 original sarsen pillars, 17 remain standing today along with six of the lintels.
Within the Sarsen Circle, a massive horseshoe-shaped structure was erected. The horseshoe, which opens to the northeast, toward the entrance to the structure, was constructed of five pairs of gigantic upright blocks of sarsen. Each block weighs 40 metric tons or more. A stone lintel on top of each pair makes each into a great archway called a trilithon (a word derived from Greek that means “three stones”). The trilithons increase in height toward the central and largest one, which measures 7 m (24 ft) above the ground. Three of the five original trilithons, complete with their lintels, remain standing today.
Several other features at the site are also associated with the third phase of construction. These include the Altar Stone, a block of greenish sandstone that sits at the base of the central trilithon near the center of the horseshoe. Once standing, the Altar Stone now lies flat against the earth, and—like the bluestones—came from southwestern Wales. Just inside the interior of the circular embankment, four stones, called station stones, were erected. Two of the stones are still standing. The station stones were situated approximately in line with the older Aubrey Holes. Imaginary lines connecting the stones opposite each other intersected at the very center of the monument. In addition, more sarsen stones were placed near the entrance to the monument. The two that survive are called the Slaughter Stone and the Heel Stone. The Heel Stone rises just outside the encircling ditch on the Avenue, a long earthwork structure that is marked by parallel banks. The Avenue is interpreted as a ceremonial approach to Stonehenge.
In later years, the bluestones were further rearranged. Eventually, some of the bluestones were used to erect a circle of pillars between the Sarsen Circle and the trilithon horseshoe, and a horseshoe of bluestone pillars was erected inside the trilithon horseshoe.
There are more than 1,000 stone circles in the British Isles, but Stonehenge is unique among them. No other circle has massive stones trimmed into neat shapes, like giant building bricks, or lintels perched atop them. The sophisticated engineering and joinery employed at Stonehenge suggest that it was built by people who were skilled in making great structures out of timber. Archaeologists now know that Stonehenge was just one of many prehistoric structures, collectively called henges, built of earth, river gravel, timber, or stone. Like the surviving stone circles, most were circular in shape.
| 28 |
| Vote |
Subscribe to this blog
