Computer Data Recovery Sydney
February 14th 2012 02:33
Computer Data Recovery Sydney
So you have a failed computer?
- Are the power and disk cables properly connected?
- Is configuration or disk information correct?
- Try the defective unit with a different adapter/controller interface or on a different computer.
- Is there an experienced technician at a local store or the company help desk that you can consult, if these steps are beyond your capabilities? (Make sure whoever is in contact with your data loss situation is fully aware that they should do nothing during their troubleshooting that will risk hurting your data.)
Has it been established that the hard drive is at fault.
If you are facing a data loss situation, what not to do is very important!
- Do not power up a device that has obvious physical damage.
- Do not power up a device that has shown symptoms of physical failure. For example, disks that make "obvious mechanical fault noises" such as ticking or grinding, should not be repeatedly powered on and tested as it just makes them worse.
- Do not use free software. This is very important. Free data recovery software can be extremely dangerous and ruin your chances for a successful data recovery. Many companies offer free data recovery software -- also called Do-It-Yourself (DIY) data recovery software -- available for download on their website.
Even the best programs only work in very specific situations. While these free tools that are available may help, they usually only help if you are encountering one of a very few specific data loss situations.
Some programs may cause further or permanent data loss. While these programs are provided with good intention, even when carefully used these utilities may cause recoverable data to be permanently lost and may cause the loss of additional data.
Anyway, there is something you CAN do; if you are having data access problems and your media has no symptoms of physical failure or damage, try and check some obvious issues before deciding if you need data recovery:
Doesn't work? Don't panic; if the damage occurred to the drive's electronics, it most likely could be fixed. If the damage occurred to the, for example, system areas of the disk, leaving the data zone intact, those data could be theoretically, and (in some cases) practically, recovered by a professional.
Look on the Net for data recovery companies, ask them questions, explain them your situation. In most cases they will be able to understand your problem and fix it for a fair price.
CBL Sydney Data Recovery the company is 100% focused on data recovery - with a "no data - no charge" policy and a free lab quote. That means that they do not get paid if they do not get data, no matter how much time the technicians spend in the lab or how many parts we consume in the process.
The technicians here have been trained in Germany, UK, Singapore and Canada, data recovery is not a school trained subject and we have been doing data recovery for over 18 years world wide.
A rough estimate on price however are as follows -
~ Logical - $400 - $1400
~ Electrical - $1000 - $2150
~ Physical - $1400 - $3000
CBL Sydney Data Recovery does not work on repeat business, one data recovery failure is enough for any person to suffer. Our business here in Australia has been built on word of mouth and we have doubled every year.We push our technicians pretty hard for results that will make our clients happy.
If you would like to contact the office you may do so on 1800 287 225 or in Sydney 02 9437 5755
So you have a failed computer?
- Are the power and disk cables properly connected?
- Is configuration or disk information correct?
- Try the defective unit with a different adapter/controller interface or on a different computer.
- Is there an experienced technician at a local store or the company help desk that you can consult, if these steps are beyond your capabilities? (Make sure whoever is in contact with your data loss situation is fully aware that they should do nothing during their troubleshooting that will risk hurting your data.)
Has it been established that the hard drive is at fault.
If you are facing a data loss situation, what not to do is very important!
- Do not power up a device that has obvious physical damage.
- Do not power up a device that has shown symptoms of physical failure. For example, disks that make "obvious mechanical fault noises" such as ticking or grinding, should not be repeatedly powered on and tested as it just makes them worse.
- Do not use free software. This is very important. Free data recovery software can be extremely dangerous and ruin your chances for a successful data recovery. Many companies offer free data recovery software -- also called Do-It-Yourself (DIY) data recovery software -- available for download on their website.
Even the best programs only work in very specific situations. While these free tools that are available may help, they usually only help if you are encountering one of a very few specific data loss situations.
Some programs may cause further or permanent data loss. While these programs are provided with good intention, even when carefully used these utilities may cause recoverable data to be permanently lost and may cause the loss of additional data.
Anyway, there is something you CAN do; if you are having data access problems and your media has no symptoms of physical failure or damage, try and check some obvious issues before deciding if you need data recovery:
Doesn't work? Don't panic; if the damage occurred to the drive's electronics, it most likely could be fixed. If the damage occurred to the, for example, system areas of the disk, leaving the data zone intact, those data could be theoretically, and (in some cases) practically, recovered by a professional.
Look on the Net for data recovery companies, ask them questions, explain them your situation. In most cases they will be able to understand your problem and fix it for a fair price.
CBL Sydney Data Recovery the company is 100% focused on data recovery - with a "no data - no charge" policy and a free lab quote. That means that they do not get paid if they do not get data, no matter how much time the technicians spend in the lab or how many parts we consume in the process.
The technicians here have been trained in Germany, UK, Singapore and Canada, data recovery is not a school trained subject and we have been doing data recovery for over 18 years world wide.
A rough estimate on price however are as follows -
~ Logical - $400 - $1400
~ Electrical - $1000 - $2150
~ Physical - $1400 - $3000
CBL Sydney Data Recovery does not work on repeat business, one data recovery failure is enough for any person to suffer. Our business here in Australia has been built on word of mouth and we have doubled every year.We push our technicians pretty hard for results that will make our clients happy.
If you would like to contact the office you may do so on 1800 287 225 or in Sydney 02 9437 5755
| 18 |
| Vote |
subscribe to this blog
